HOW CAN WE HELP YOU
Aria Support
Register Your Product
Selected FAQs
The base is not required to achieve a safe and secure install. The lap belt routes through the guides on the carrier that are located near the carry handle and the shoulder belt routes behind the carrier through the guide located above the carrier release from base handle. Reference the Aria manual and vehicle manual for seat belt installation guidance. Ensure the red line on the side of the carrier is parallel to the vehicle floor rather than the ground outside the vehicle. Ensure the back angle of the carrier stays in the correct position and the carry handle is rotated forward to the 5th position. Ø
Effortless installation and installs in seconds with our SmartSecure® system, auto-retracting LATCH design, and red to green visual indicators.
Øes, the Aria carrier is FAA approved when used according to the instruction manual. We suggest you travel with your Aria in flight for optimal safety. The Aria base is not approved for aircraft use.
The Aria combines lightweight portability with uncompromised safety and comfort. Its features include an adjustable load leg and anti-rebound+ panel in the base for added stability and energy absorption. The SmartSecure system confirms proper and secure installation. The carrier incorporates European belt routing, a 5th rebound carry handle position for vehicle use, precise headrest adjustment with a 5-point no-rethread harness, and a robust 2-piece infant inlay.
The Aria is UPPAbaby’s lightest infant car seat and sets new standards weighing just under 6lbs. The extra-large UPF 50+ hideaway canopy with back panel ventilation and pop out extended sunshade intuitively provides additional airflow and sun protection when needed, and can be simply pushed back when not.
The Aria is compatible with Vista and Cruz Strollers for direct attachment, and also compatible with the Minu and Ridge strollers with the use of adaptors.
UPPAbaby recommends transitioning your child out the Aria by their first birthday or the 1-inch rule, whichever comes first. The 1-inch rule is applied when your child is using the headrest in its highest position and when the top of their head is less than 1-inch from the top of the headrest structure. Please note that transition should also occur when your child meets the 30 lbs. weight limit or 30” in height, whichever comes first.
No, UPPAbaby does not allow vehicle seat protectors with their car seats because they haven't been tested or approved for use. The car seat base has a finished bottom to prevent vehicle seat damage.